Cisco 3200 Series 802.11B/G Wireless Mobile Interface Card

The Cisco® 2.4 GHz 802.11b/g Wireless Mobile Interface Card (WMIC) for Cisco 3200 Series routers provides integrated 802.11b/g wireless WAN or LAN capabilities. Designed in the same ruggedized, compact PC/104-Plus form factor as the Cisco 3200 Series Router, the Cisco 2.4 GHz 802.11 WMIC is engineered to be integrated as part of a Cisco 3200 Series Router solution, eliminating the need to use external 802.11b/g bridges or access points. The integrated WMIC helps enable a mobile network in vehicles as well as outdoor wireless infrastructure

The Cisco 3200 Series Wireless and Mobile Routers (see Figure 1) offer organizations such as public safety, homeland security, and transportation agencies the following key solution benefits:

• A rugged Cisco IOS router in a modular compact design, suited to create mobile networks in and around vehicles

• Standards-based connectivity for a wide range wireless technologies including 802.11b/g, 4.9 GHz, 3G cellular networks, satellite, and upgradeability to future wireless technologies

• Always-on wireless access for vehicle networks with easy mobility through mobile IP regardless of location or movement

• Advanced IP services through standards-based Cisco IOS Software, offering robust network security, reliability, quality of service (QoS), and remote management functions

• Rugged enclosure from Cisco or options for third party enclosures

Refer to the Cisco 3200 Series Wireless & Mobile Router data sheets for more information about Cisco's mobile networking solutions: http://www.cisco.com/en/US/products/hw/routers/ps272/products_data_sheets_list.html

Figure 1. Cisco 3200 Wireless and Mobile Router with 2.4 GHz 802.11b/g WMIC

Table 1 gives features and benefits of the Cisco WMIC, and Table 2 gives part numbers, and Table 3 provides product specifications.

Table 1. Features and Benefits of the Cisco 3200 Series 2.4 GHz 802.11b/g WMIC

Feature

Benefit

Integration with the Cisco 3200 Series Routers

· Eliminates the need for external 2.4 GHz 802.11b/g LAN or WAN devices
· Simplifies hardware and power design for in-vehicle networks and outdoor wireless infrastructure
· Provides important component of a Cisco 3200 Router solution that combines Layer 2 and Layer 3 wireless networking with 802.11b/g and cellular connectivity

Rugged, Compact Form Factor

· Built with industrial-grade components in the PC/104-Plus architecture
· Extended temperature range of -40º to 85ºC
· Meets MIL-STD-810F and SAE standards
· WMIC card stacks on other Cisco 3200 cards sharing a common power supply

Configurable as an Access Point, Bridge, or Workgroup Bridge

· WMIC card configurable as a workgroup bridge, a root bridge, a non-root bridge, or as an access point
· Interoperability with standard based 802.11b/g access points including the Cisco 1500 Series Mesh AP
· Software configuration allows flexibility in the function of the 802.11 card capabilities

Table 2. Cisco 3200 Series 2.4 GHz 802.11b/g Wireless Mobile Interface Card Part Numbers

Part Number

Description

The Cisco 3200 Series WMICs are sold mainly as part of a Cisco 3200 Series product bundle, which typically includes the Cisco 3200 Series Router and Fast Ethernet cards, and one or multiple WMICs assembled in the Cisco rugged enclosure. For additional information refer to the Cisco 3200 Series ordering brochure: http://www.cisco.com/en/US/products/hw/routers/ps272/prod_brochure0900aecd803fabbf.html

C3201WMIC-A-K9=

Cisco 3200 Series 2.4 GHz 802.11b/g WMIC for operation in most of the Americas

C3201WMIC-E-K9=

Cisco 3200 Series 2.4 GHz 802.11b/g WMIC for operation in most of Europe

C3201WMIC-J10-K9=

Cisco 3200 Series 2.4 GHz 802.11b/g 30m WMIC for operation in Japan

Table 3. Product Specifications

Feature

Description

Data Rates Supported

1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps

Network Standard

IEEE 802.11b and IEEE 802.11g

Frequency Band

2.4 to 2.497 GHz

Network Architecture Types

Vehicular mobile networks, outdoor wireless infrastructure

Media Access protocol

Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)

Modulation

Wireless Modulation 802.11b

Direct sequence spread spectrum (DSSS):

· Differential Binary Phase Shift Keying (DBPSK) at 1 Mbps
· Differential Quadrature Phase Shift Keying (DQPSK) at 2 Mbps
· Complementary Code Keying (CCK) at 5.5 and 11 Mbps

Wireless Modulation 802.11g

Orthogonal frequency divisional multiplexing (OFDM):

· BPSK at 6 and 9 Mbps
· QPSK at 12 and 18 Mbps
· 16-quadrature amplitude modulation (QAM) at 24 and 36 Mbps
· 64-QAM at 48 and 54 Mbps

Operating Channels

North America: 11; ETSI: 13; Japan: 14

Nonoverlapping Channels

Three (United States)

Receive Sensitivity

1 Mbps: -94 dBm

2 Mbps: -91 dBm

5.5 Mbps: -89 dBm

11 Mbps: -85 dBm

6 Mbps: -90 dBm

9 Mbps: -89 dBm

12 Mbps: -86 dBm

18 Mbps: -84 dBm

24 Mbps: -81 dBm

36 Mbps: -77 dBm

48 Mbps: -73 dBm

54 Mbps: -72 dBm

Delay Spread

1 Mbps: 500 ns

2 Mbps: 400 ns

5.5 Mbps: 300 ns

11 Mbps: 140 ns

6 Mbps: 300 ns

9 Mbps: 300 ns

12 Mbps: 300 ns

18 Mbps: 300 ns

24 Mbps: 240 ns

36 Mbps: 240 ns

48 Mbps: 120 ns

54 Mbps: 120 ns

Available Transmit Power Settings

802.11b:

· 100 mW (20 dBm)
· 50 mW (17 dBm)
· 30 mW (15 dBm)
· 20 mW (13 dBm)
· 10 mW (10 dBm)
· 5 mW (7 dBm)
· 1 mW (0 dBm)

Maximum power setting will vary according to individual country regulations.

802.11g:

· 30 mW (15 dBm)
· 20 mW (13 dBm)
· 10 mW (10 dBm)
· 5 mW (7 dBm)
· 1 mW (0 dBm)

Maximum power setting will vary according to individual country regulations

Range (typical @ 100-mW transmit power setting with 6 dBi diversity dipole antenna)

Outdoor:

· 0.5 mile (804m) @ 45 Mbps
· 1 mile (1609m) @ 11 Mbps
· 3 miles (4827m) @ 1 Mbps

Compliance

Operates license free under FCC Part 15 and complies as a Class B device; complies with DOC regulations; complies with ETS 300.328, FTZ 2100, and MPT 1349 standards; rugged version complies with UL 2043

Simple Network Management Protocol (SNMP) Compliance

MIB I and MIB II

Antenna

Antennas Supported for 2.4 GHz (Stationary)

ANT3549

PATCH

9 dBi

ANT1729

PATCH

6 dBi

ANT2506

OMNI MAST

5.2 dBi

ANT24120

OMNI MAST

12 dBi

ANT2410

YAGI

10 dBi

ANT1949

YAGI

13.5 dBi

ANT3338

DISH

21 dBi

Mobile Antennas Supported

BMAXC24503

Mobile MAG Mount

3 dBi

BMAXC24505

Mobile MAG Mount

5 dBi

BMAXC24003

Mobile MAG Mount

5 dBi

For more information on antennas refer to the Cisco 3200 series Antenna Brochure: http://www.cisco.com/en/US/products/hw/routers/ps272/prod_brochure_list.html

Universal Workgroup Bridge

Allows the Cisco 3200 Series Router to connect as a workgroup bridge to standard based 802.11b/g access points with the ability to utilize multiple profiles for various authentication types.

VLAN Support

Allows segmentation of up to 16 user groups, creating increased system flexibility by allowing differentiation of LAN policies and services, such as security and QoS, for different users.

Multiple BSSIDs

MBSSIDs provides up to 16 SSIDs to utilize with multiple VLANs.

Quality-of-Service (QoS) Support

Wireless Multi-media (WMM) as part of the 802.11e specification for wireless QOS. Prioritization of traffic for different application requirements to improve the voice and video user experience.

Security

Cisco Wireless Security Suite supporting WPA and WPA2, including:

· Authentication
· 802.1X support including LEAP, PEAP, EAP-TLS (Root-AP & Client), EAP-TTLS, EAP-SIM, and EAP-FAST
· Encryption
· WPA: Cisco TKIP or WPA TKIP
· WPA2: AES (802.11i)

Status Indicators

Signals for four status indicators (ETH, RF, INSTALL, and STATUS) to provide information concerning association status, operation, error or warning, firmware upgrade, configuration, network or modem, and radio status

Automatic Configuration Support

BOOTP and Dynamic Host Configuration Protocol (DHCP)

Remote Configuration Support

Telnet, HTTP, FTP, Trivial File Transfer Protocol (TFTP), and SNMP

Local Configuration

Direct console port

Dimensions

3.775 in. wide x 0.937 in. high x 3.550 in. deep

Height dimension includes component side height, board height, and the shroud height on the solder side

Weight

0.22 lb (0.102 kg)

Rugged Enclosure

The Cisco 3200 Series offers Cisco 3200 system bundles in a rugged enclosure:

http://www.cisco.com/en/US/products/hw/routers/ps272/products_data_sheet0900aecd8028e3a7.html

Environmental

· Operating temperature*1: 4.9GHz WMIC states -35 to +50C (operating) while 2.4GHz WMIC states -40 to +85C (operating)
· Operating altitude: 15,000 ft
· Nonoperating temperature: -40° to +85°C
· Nonoperating altitude: 40,000 ft

Note: For additional environmental information, contact your account team.

Input Power Requirements

3.3V and 5.0V input required (same as the Cisco 3200 card stack); for additional power information and for reference to an off-the-shelf power card information, contact your account team

Warranty

90 days

WiFi Certification

1Immediate local ambient temperature around onboard components; system level external ambient operating temperature may vary depending on the enclosure and the thermal solution used.

ORDERING INFORMATION

The Cisco WMIC was developed for the Cisco 3200 Series Routers to provide integrated 802.11b/g wireless WAN or LAN capabilities. For additional information refer to the Cisco 3200 Series ordering brochure: http://www.cisco.com/en/US/products/hw/routers/ps272/prod_brochure0900aecd803fabbf.html

SERVICE AND SUPPORT

Cisco Systems® offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services.

FOR MORE INFORMATION

For more information about the Cisco 3200 Series routers, visit http://www.cisco.com/go/3200 or contact your local Cisco account representative.
2007/05/05 21:35 2007/05/05 21:35

트랙백 주소 :: http://thinkit.or.kr/network/trackback/376

댓글을 달아 주세요