Cisco 4-Port High-Density FXS/DID Analog Voice Interface
Card for the Cisco 1700 Series Modular Access Routers

The Cisco 1700 Modular Access Router is designed to provide a cost-effective integrated access platform for small and medium-sized businesses and small enterprise branch offices. It supports advanced services e-Business features such as VPNs; secure Internet, intranet, and extranet access with optional firewall technology; broadband DSL and cable connectivity; and multiservice voice/video/data/fax integration.

Figure 1
Cisco 4-Port FXS/DID VIC with Caller ID Support


The 4-port high-density FXS/DID VIC can support up to 4 foreign-exchange-station (FXS) ports for directly connecting phones or fax machines, or it can be used to connect up to four direct-inward-dial (DID) analog trunks, providing customers the flexibility they need for their unique business environment (refer to Figure 1). Each port on the 4-Port FXS/DID VIC is selectable for use in either FXS or DID mode. The 4-Port FXS/DID VIC is the same size as the existing two-port voice interface cards (VICs), allowing it to slide into either WIC/VIC slot or VIC slot in Cisco 1751 and 1760. The Cisco 1751 can support three VIC-4FXS/DID cards with a maximum of four ports in DID mode. The Cisco 1760 can support four VIC-4FXS/DID cards with a maximum of eight ports in DID mode. Figure 2 shows a typical application of 4-port VIC-FXS/DID in a small enterprise branch office with KTS or small PBX. The VIC-4FXS/DID in the Cisco 1700 is used to connect analog phones or fax machines. The long-distance calls between small enterprise branch offices and headquarters are carried by IP network, while the local calls are carried by PSTN, which also provide backup to the IP network.

DSP Requirements for the Cisco VIC-4FXS/DID

For Cisco 1751 and 1760 routers, the medium-complexity analog digital-signal-processor (DSP) image is the factory default for supporting the 4-Port FXS/DID VIC. This DSP image provides support for four voice channels (of G.711, G.729a, or G.726) for each DSP chip. For example, the Cisco PVDM-256K-4 DSP Module has one DSP chip and is, therefore, capable of supporting four voice channels on the 4-Port FXS/DID VIC. The medium-complexity analog DSP software image supports four channels of G.711, G.729a, G.726, fax relay, or modem or fax pass-through, and it provides support for 32-msec echo cancellation per DSP chip.

Figure 2
Small Offices with POTS Phones and Fax Machines

The 4-Port FXS/DID VIC also support the high-complexity analog DSP software image. This DSP image provides support for two voice channels (of G.711, G.729, G.723.1, G.728, or G.726) for each DSP chip. Therefore, a Cisco PVDM-256K-8 Module (two DSP chips) is required to support four voice channels on the 4-Port FXS/DID VIC. The high-complexity analog DSP image supports two channels of G.711, G.729, G.726, G.728, G.723.1, fax relay, or modem or fax pass-through, and it provides support for 32-msec echo cancellation per DSP chip.

For DSP requirements on the Cisco 1751 and 1760 routers with Cisco IOS® 12.2(8)YN or later releases, refer to the DSP Calculator at the following URL:

Key Benefits and Technical Specifications

Table 1 provides the benefits and specifications and Table 2 provides the Electro Magnetic Compatibility (EMC) standards for the 4-Port FXS/DID VIC.

Table 1: Benefits and Specifications of the Cisco 4-Port FXS/DID VIC
Part Number: VIC-4FXS/DID
  • 4-port FXS or DID voice/fax interface card with caller ID support
    (DID for United States, Canada, and other countries)

Interface type
  • FXS and DID trunk

Supported platforms
  • Cisco 1751 and Cisco 1760

First Cisco IOS® Release
  • Cisco IOS 12.2(8)YN (this is a short lived Early Deployment (ED) release which will merge into IOS 12.3(1)T)

Minimum Feature Sets

Ringer Equivalence Number (REN)
  • A maximum of five REN loads can be supported on each voice port

  • A maximum of eight REN loads can be supported on each 4-port FXS/DID VIC

  • A maximum of twenty REN loads can be supported on each Cisco 1751 and 1760 router

  • UL 60950 (United States), CSA C22.2 No. 60950-00 (Canada), EN 60950 (Europe), AS 3260 (Australia), TS 001 (Australia))

FXS homologation
  • United States (TIA/EIA-1S-968), Canada (CS-03 I)

DID homologation
  • United States (TIA/EIA-1S-968), Australia (ACIF S002/S003)

  • Refer to Table 2

  • Part number VIC-4FXS/DID=

Signaling modes
  • FXS—Loop Start

  • DID—Wink, Immediate, and Delay Dial

Address Signaling formats
  • In-band dual tone multifrequency (DTMF)

  • Out-of-band pulse (10/20 pps)

Tone disconnect supervision
  • DID—Power denial (caller party control, far-end disconnect)

Ringing frequencies
  • 20 Hz, 50 Hz

Physical connector
  • RJ-11

Number of connectors
  • 4

Mean time between failure (MTBF)
  • 2,131,306 hours

Table 2: EMC for the Cisco 4-Port FXS/DID VIC
FCC Part 15 Class B


EN55022: 1998, Class B


EN61000-3-2: 1995


EN61000-3-3: 1995


EN50082-1: 1997


EN55024: 1998









RF fields






Conducted RF


Voltage dips/sags/interruptions

2007/05/04 11:35 2007/05/04 11:35

트랙백 주소 ::

댓글을 달아 주세요