Cisco 2600/3600/3700 10/100 Ethernet/Token Ring Mixed Media NMs

CISCO/라우터 & 라우팅 시스템 2007/05/04 12:15
Cisco Ethernet/Token Ring Mixed Media Network Modules

The NM-1FE2W, NM-2FE2W, NM-2W, NM-1FE1R2W, NM-1FE2W-V2 and NM-2FE2W-V2 WAN Interface Card carrier modules allow customers using Cisco 2600, 3600, 3700 and 3800 Series Routers to benefit from the increased performance and density capabilities delivered by this family of network modules. Features include auto-sensing 10/100 Mbps Fast Ethernet ports and TDM capabilities.

Figure 1. 10/100 LAN/WAN Combo Network Modules

INTRODUCTION

Table 1. Four different network modules are available to increase LAN/WAN densities for the Cisco 2600, 2691, 3600, 3700 and 3800 series of multi-service and Integrated Services routers.

Part Number

Description

NM-1FE2W/ and NM-1FE2W-V2

1-port 10/100 Ethernet 2 WAN Card Slot Network Module

NM-2FE2W and NM-2FE2W-V2

2-port 10/100 Ethernet 2 WAN Card Slot Network Module

NM-1FE1R2W

1-port 10/100 Ethernet 1 4/16 Token Ring 2 WAN Card Slot NM

NM-2W

2 WAN Card Slot Network Module (no LAN interface)

FEATURES

• Supported on Cisco 2600 (NM-2W only) 2691, 3600, 3700 and 3800 series Branch office routers

• Supports WICs and VWICs (see below for a complete list)

• Increase WIC density in Cisco 2600, 2691, 3700 and 3800 series

• Support for up to 8Mb throughput on a WIC interface

• 10/100 autosensing full/half duplex

• Full and half duplex Token Ring Support

• TDM enabled

The following WICs and VWICs are supported:

• WIC-1B-S/T

• WIC-1B-S/T-V3

• WIC-1B-U

• WIC-1B-V2

• WIC-1DSU-56K4

• WIC-1DSU-T1

• WIC-1DSU-T1-V2

• WIC-1T

• WIC-2T

• WIC-2A/S

• WIC-1AM

• WIC-2AM

• WIC-1ADSL

• WIC-1ADSL-V2

• WIC-1GSHDSL

• VWIC-1MFT-T1*

• VWIC-1MFT-E1*

• VWIC-1MFT-T1-DI*

• VWIC-1MFT-E1-DI*

• VWIC-2MFT-E1*

• VWIC-2MFT-T1*

• VWIC-2MFT-T1-DI*

• VWIC-2MFT-E1-DI*

• VWICs in data mode only

Table 2. The following table compares supported features and the major enhancements over the current legacy mixed media network modules.

Feature

NM-1E2W and NM-2E2W

NM-1FE2W, NM-2FE2W, NM-1FE1R2W

Max T1/E1 WIC Connections

2

4

VWIC Support

Limited

Full

WIC Support

Limited

Full

WIC Throughput

2Mb

8Mb

TDM Support

No

Yes

Ethernet Support

10Mb

10/100Mb

G.703 WIC Support**

No

Yes

Full Duplex Token Ring

No

Yes

** FCS 2HW/00

Table 3. Maximum number of network modules that are supported in the 2600, 2691, 3600, 3700 and 3800 families is shown below.

 

2600

2691

3620

3640

3660

3725/3825

3745/3845

NM-1FE2 AND NM-1FE2W-V2

N/A

1

2

4

6

2

4

NM-2FE2W AND NM-2FE2W-V2

N/A

1

2

4

6

2

4

NM-1FE1R2W

N/A

1

2

4

6

2

4

NM-2W

1

1

1

3

6

2

4

ORDERABILITY, AVAILABILITY, COMPATIBILITY, MINIMUM SOFTWARE, AND MEMORY REQUIREMENTS

Table 4. The 10/100 LAN/WAN combo Network Modules product numbers and description are listed below.

Product Number

Description

NM-1FE2W/NM-1FE2W-V2

1-port 10/100 Ethernet with 2 WAN Card Slot Network Module

NM-2FE2W/NM-2FE2W-V2

2-port 10/100 Ethernet with 2 WAN Card Slot Network Module

NM-1FE1R2W

1-port 10/100 Ethernet 1 4/16 Token Ring 2 WAN Card Slot NM

For the NM-1FE2W, NM-2FE2W, NM-1FE1R2W, and NM-2W the minimum level of IOS is 12.0(7)XK or 12.1(1)T.
For the NM-1FE2W-V2 and NM-2FE2W-V2 the minimum level IOS is 12.2(12)M and 12.2(13)T.

Table 5. 10/100 LAN/WAN combo Network Modules (NM-1FE2W, NM-2FE2W, NM-1FE1R2W, and NM-2W) platforms supported, minimum Cisco IOS® Release, minimum Memory and Maximum Number Supported.

Product

Minimum Cisco IOS Software Required

IOS Feature Set

Minimum DRAM Memory*

Maximum Supported

Cisco 2600 Series

12.0(7)XK

All Cisco IOS Feature Sets

32 MB

1

Cisco 2600XM Series

12.2(8)T

All Cisco IOS Feature Sets

32 MB

1

Cisco 2691

12.2(8)T

All Cisco IOS Feature Sets

64 MB

1

Cisco 2811, 2821, 2851

N/A

N/A

N/A

Not supported

Cisco 3620

12.0(7)XK

Any Cisco IOS Feature Set

32 MB

2**

Cisco 3640

12.0(7)XK

All Cisco IOS Feature Sets

32 MB

4**

Cisco 3660

12.0(7)XK

All Cisco IOS Feature Sets

32 MB

6

Cisco 3725

12.2(8)T

All Cisco IOS Feature Sets

N/A

2

Cisco 3825

12.3(11)T

All Cisco IOS feature sets

N/A

2

Cisco 3745

12.2(8)T

All Cisco IOS Feature Sets

N/A

4

Cisco 3845

12.3(11)T

All Cisco IOS Feature sets

N/A

4

* The NM-1FE2W-V2 and NM-2FE2W-V2 have the same memory requirements as the non-V2 network modules.
** Only 1 of the NM-2W is supported in the 3620, and only 3 NM-2W are supported in the 3640.

PHYSICAL SPECIFICATIONS

Table 6. Standards and Compliance Support

Product Feature

Product Specifications

Dimensions

1.55 x 7.10 x 7.2 in (H x W x D)

Weight

2.5 lbs. Maximum

Environmental Conditions
· Operating temp. 32°-104° F (0° -40° C)
· Nonoperating temp. -13° to -158° F (-25 to 70° C)
Power Requirements

15 watts Maximum

Relative Humidity

5 to 95%

MTBF
· NM-2W-1,720,096 hours
· NM-1FE2W and NM-1FE2W-V2-846,192 hours
· NM-2FE2W and NM-2FE2W-V2-569,302 hours
· NM-1FE1R2W-507,634 hours
Protocols Supported

Full Cisco IOS Software as of 12.0(7)XK

WIC Performance

Up to 8Mb/s per network module

EMI

FCC Part 15 Class B-CISPR 22 Class B

Cabling

WAN cables dependant on WICs. LAN interfaces have 10/100BaseT cables for Ethernet and STP/UTP cables for Token Ring

LEDs

Token ring 4/16 speed indication. Ethernet 10/100 Speed Indication. Link and full Duplex LEDS

Network Interfaces

Compatible with all existing network modules and WICS supported by Cisco 2600/2691/3600/3700/3800 routers

SUPPORTED MANAGEMENT INFORMATION BASE (MLBS)

The 10/100 LAN/WAN network modules support the standard Management Information Base (MIBs).
For descriptions of supported MIBs and how to use MIBs, see the Cisco MIB web site at:

REGULATORY APPROVAL

UL 1950
2007/05/04 12:15 2007/05/04 12:15
트랙백 0개, 댓글 0개가 달렸습니다.

트랙백 주소 :: http://thinkit.or.kr/network/trackback/353

댓글을 달아 주세요

1 ... 26 27 28 29 30 31 32 33 34 ... 382